Maintenance Technician II

Description :


Maintenance Technician II

 General Statement of Duties

 Maintains treatment plant equipment, grounds, buildings, and vehicles through preventative, predictive, and emergency maintenance while taking great pride in plant cleanliness, organization, and appearance. 

Organizational Responsibilities

Works under the direction of the Maintenance Lead. This position requires a 40-hour work week.  Maintaining an acceptable MVR is required as this position may use a company vehicle. 

Typical Duties

  1. Grounds keeping
  • Performs grounds keeping duties such as, but not limited to, mowing, weeding, sweeping/washing drives, snow removal, and landscape maintenance.
  • Performs building maintenance duties such as, but not limited to, painting, sweep/clean floors, washing windows, wiping cabinets and handrails, pressure washing walls/floors, remove garbage, and organization of shop/maintenance areas.
  • Performs inspections and maintains the storm water detention pond.
  • Identifies plant ground and structural areas of concern, communicates issues with Maintenance Lead, and collaborates on potential solutions to issue.

 Plant Maintenance

  • Performs maintenance on all plant equipment, vehicles, and heavy equipment, including but not limited to, oil changes, belt inspection and replacement, troubleshooting, and repair.
  • Performs maintenance on all plant buildings including, but not limited to, setting anchors, minor grout repair, fluorescent light and fluorescent light ballast replacement, photocell replacement, door hardware inspections and tightening, and automatic door closer adjustments.
  • Performs maintenance on all HVAC units including, but not limited to, filter change, bearing and motor greasing, pillow block replacement, motor replacement, and ignitor replacement.
  • Performs minor electrical troubleshooting using electrical drawings and multimeter on floats, fuses, circuits, and HVAC controls.
  • Works with all plant staff to troubleshoot and remedy mechanical and structural issues.
  • Performs removal, bearing replacement, cleaning, and installation of electric motors.
  • Performs removal, cleaning of bearings, mechanical seal and oil seal replacement, and installation of small gear boxes and pump rotating assemblies.
  • Performs copper pipe repair and installation using soldering, and shark bite connections.
  • Performs PVC pipe repair and installation using PVC primer and PVC glue.
  • Installs supports for copper, PVC, and ductal piping using masonry anchors, Unistrut supports, or clevis hangers.
  • Participates in all major plant projects.
  1. Other Duties
  • Must comply with standard operating procedures.
  • Creation and upkeep of standard operating procedures.
  • Follows safety and health guidelines, orders, and directives.
  • May operate heavy equipment such as skid steer, forklift, mower, front loader, and trailer jockey.
  • Uses company vehicle to pick up parts as needed.
  • Works cooperatively and jointly with PCWRA staff as needed.
  • Data entry into Antero CMMS including, but not limited to, supply inventory and cost, task creation and updates to existing task steps, tools, or supplies needed, and completed work order entry.
  • Performs cleaning of tanks on plant site as needed.
  • Assist with training other Maintenance Technicians as assigned.
  • Performs other duties as assigned.

 These duties are not all inclusive but represent items that are critical to successfully accomplish this particular position.

 Education and Experience

  • High school diploma or equivalent.
  • 1-year minimum experience in industrial maintenance.
  • An equivalent combination of education, training and relevant job experience may be substituted.

Required Knowledge, Skills, and Abilities

  • Mechanical aptitude.
  • Thorough, detail oriented, and well organized.
  • Good written and verbal communication skills.
  • Ability to work independently and under limited supervision.
  • Proficient in Microsoft Office Suite.
  • Knowledge of materials, construction, and operation of equipment used in modern wastewater treatment plants.
  • Knowledge of occupational hazards and safety precautions pertaining to all phases of maintenance in a wastewater treatment plant utilizing mechanical and electrical equipment.
  • Ability to operate and maintain equipment used in job duties.
  • Knowledge of practices, methods, materials, and tools used in the repair and preventive maintenance of equipment used in job duties.
  • Comprehend and make inferences from written material.
  • Work safely without presenting a direct threat to self or others.
  • Valid Colorado driver’s license with an acceptable MVR.

Desired Qualifications

  • Electrical training.
  • Certification in basic first aid and CPR.
  • Associate degree in wastewater technology or maintenance field.

Working Conditions and Physical Requirements

  • Work is performed indoors, outdoors and in a shop environment.
  • May be exposed to various weather conditions including wet, hot, and cold.
  • May be exposed to various environmental conditions such as excessive noise, solvents, grease and oils, and slippery or uneven walking surfaces.
  • Must follow all safety programs including, but not limited to, confined space and respiratory requirements.
  • Must be able to lift up to 50 pounds.
  • Moderate to strenuous physical work
  • Activities requiring full range of body movements; sitting, bending, stooping, kneeling, walking, squatting, crawling, twisting, and climbing.

Salary Range:

Annual Salary:  $55,903 - 78,265
Hourly Rate:  $26.88 - 37.63

Contact :

Deadline for Applying : Open until filled